With fuel prices climbing and solar cells seemly more reasonable, accumulation of solar power to your residence is a great, sustained period solution to excessive energy bills. Surely many have heard on the subject of solar power but at all times belief it was too expensive, aside from minor uses in the currently widespread backyard lighting systems.
The Unique thing about solar panel is that it is cost effective, relatively easy to maintain and it is more efficient. A lot of people still don't really no what the use of solar can do for then, they just think the only thing it does is to produce electricity. But on the contrary; solar energy can be used to heat up the swimming pool for those that have it, or even your water in the house when you want to take a bath. Solar can also be use to heat up to it up the house during cool season, instead of paying high bills to electric companies who will charge high for heaters.
Relatively the price of producing a solar panel as reduced when compared to what it used to be. Installation of what will call photovoltaic cells to a house might sightly be high, while in other places the incentives given to install solar panels reduces the total cost by half. This will let you know if the usage of solar energy is the best option or not:
• Your energy consumption will determine the type of system you should go for. If after checking the consumption of electricity in your house and you discovered that it is on a high side, then solar energy would be the best option for you to reduce the huge amount of money sent on bills.
•The photovoltaic is like the storage device that actually transfer electricity from the sun ray into the house. So the size of photovoltaic determines the voltage to be supplied, so you will need to check the size of the photovoltaic system that will meet the required power needed in your house or company.
• The refunded agreement given and encouragement policies available to you from the company or even if you want to build it yourself. This will assist you in getting a solar system at the cheapest price available.
• Check if you solar system gives you the chance to network or not. Networking will give you the chance to sell when you have excess and buy electricity when you don't have enough, but if not network; the battery will act as a back up.
• You will need to take in consideration the economical and environmental benefit. Using a solar system means that less pollution to the environment but economically, you will still spend money getting you solar system
Making solar power as your source of generating electricity is the best and sure way out of saving thousands of dollars and making the environment healthy friendly. It's not easy to get a solar panel at first, but when you take to cognizance the benefits, one will surely appreciate it more. You can watch a free video that will teach you more on solar panel here
Friday, September 18, 2009
Tuesday, September 15, 2009
7 Tips On The Tools Needed To Build Your Personal Solar Panel
Amid all the components in a residence solar power method, the largely notable part is the solar panels. The solar panel is also the mainly expensive element of the total method. It mostly takes up nearly 60 percent of the entire project cost.
Basically we are talking about cheap source of generating electricity, so getting panels at a very expensive price will be very discouraging to most people they have opted for solar energy. So the best way out is to the alternative option which we call 'Do It Your Self Solar Panel'. I will be explaining the 7 basic equipments needed to get you solar panel.
1) Soldering Iron:
The soldering Iron also called soldering gun will be used to join the required electrical conductor for the solar cells together. Flux will also be required in cleaning the burning metal tip and at the same time, it makes a fast melt of the led for easy usage.
2) Caulking gun
The caulking gun is basically used to fill in all the cracks and joint in the plywood or woods to be used. The caulking tool makes the filling very easy and gives it a neat appearance.
3) Saw (ELECTRIC):
The saw will be used to basically cut in pieces the plywood needed for the panel box. Electrical saw works easier and faster in cutting woods, but it is completely optional, the normal tiny saw can also be used.
4) Paint brush:
All the lumber surfaces needs to be covered with a pair layer of Ultra-Violate protective paint. That will give a quantity of protection on the wood from the Ultra-Violate of the sun.
5) Screwdriver:
The most useful tool when we need to slacken and tighten screws on the solar panel. The only screws on the panel will be used to hold the Plexiglas to the wooden strips securely.
6) Multi-meter:
After constructing the panel, the basic thing to do before usage is testing the voltage of electricity supplied into the Photovoltaic. Essentially the meter is the tool that will be used to do such a thing as regards regulating the current supplied into the cells of the panel.
7) Eye protection: When a project involves the use of tools that are chemical and electrical in nature the eye needs to be protected so as to guide against dangerous accident that can harm one
These are the some of the tools needed to build an electricity generating panel yourself at a very cheap rate. The full detailed videos are also available HERE
Basically we are talking about cheap source of generating electricity, so getting panels at a very expensive price will be very discouraging to most people they have opted for solar energy. So the best way out is to the alternative option which we call 'Do It Your Self Solar Panel'. I will be explaining the 7 basic equipments needed to get you solar panel.
1) Soldering Iron:
The soldering Iron also called soldering gun will be used to join the required electrical conductor for the solar cells together. Flux will also be required in cleaning the burning metal tip and at the same time, it makes a fast melt of the led for easy usage.
2) Caulking gun
The caulking gun is basically used to fill in all the cracks and joint in the plywood or woods to be used. The caulking tool makes the filling very easy and gives it a neat appearance.
3) Saw (ELECTRIC):
The saw will be used to basically cut in pieces the plywood needed for the panel box. Electrical saw works easier and faster in cutting woods, but it is completely optional, the normal tiny saw can also be used.
4) Paint brush:
All the lumber surfaces needs to be covered with a pair layer of Ultra-Violate protective paint. That will give a quantity of protection on the wood from the Ultra-Violate of the sun.
5) Screwdriver:
The most useful tool when we need to slacken and tighten screws on the solar panel. The only screws on the panel will be used to hold the Plexiglas to the wooden strips securely.
6) Multi-meter:
After constructing the panel, the basic thing to do before usage is testing the voltage of electricity supplied into the Photovoltaic. Essentially the meter is the tool that will be used to do such a thing as regards regulating the current supplied into the cells of the panel.
7) Eye protection: When a project involves the use of tools that are chemical and electrical in nature the eye needs to be protected so as to guide against dangerous accident that can harm one
These are the some of the tools needed to build an electricity generating panel yourself at a very cheap rate. The full detailed videos are also available HERE
Saturday, September 12, 2009
'7 Sizzling SOLAR PANEL Tips That’ll SAVE YOUR CASH’
Solar energy is still the best way to save money when it comes to paying bills on electricity use by any person or company that consume electricity. Below I will point out the usefulness of solar panel in the house or company.
1) Panel Box: The panel itself that will be used in redirecting electricity from sunlight, lighting, rain and wind; is box like in shape which is regularly strong, It would be kept on the roof of the house. Most importantly the durability of the solar panel is determined by how strong the panel is.
2) Some roofs are naturally not strong, since the panel box are made in different capacity. Some are made with very light aluminium sheet but, it still provide the same output of energy.
3) Photovoltaic is where the sun will reaches from the top of the roof. So it has to be a very strong, thick and clear grass. It is a solar panel box, with low reflection and high absorption rate from natural energy.
4) The panel box has to with at most 7 to 10 years warranty from the company that produced it. This is to give assurance to a client that intend buying and on the other side to show that solar energy it still the best source of getting electricity from rain, thunder, wind and sunlight.
5) I have talked about a long range of warranty above, but the only thing anybody that uses a solar panel need to have at the back of his or her mind is that, the panel needs maintenance occasionally once or twice yearly from the company that installed it. This is to make the panel to continue its work optimally.
6) This is what you should look out for when you want to use a solar panel; it must have what we call 'water tight facility'. This is crucial because of rain, snow and wide wind. Remember I said something about 'Photovoltaic', initially; when a water particle mistakenly goes into the cell area of the photovoltaic, and it seriously affects the panel from working well.
7) When going for a panel, go for one that has multiple ways of fittings, this will make it easy for anybody to attach it. Look out for panel with 'anodized aluminum'
There you have it '10 Sizzling SOLAR PANEL Tips That'll SAVE YOUR CASH' forever. With these tips, your best choice should be going for solar energy, which I also went for after spending huge amount on bills on electricity. Get more details tips here
1) Panel Box: The panel itself that will be used in redirecting electricity from sunlight, lighting, rain and wind; is box like in shape which is regularly strong, It would be kept on the roof of the house. Most importantly the durability of the solar panel is determined by how strong the panel is.
2) Some roofs are naturally not strong, since the panel box are made in different capacity. Some are made with very light aluminium sheet but, it still provide the same output of energy.
3) Photovoltaic is where the sun will reaches from the top of the roof. So it has to be a very strong, thick and clear grass. It is a solar panel box, with low reflection and high absorption rate from natural energy.
4) The panel box has to with at most 7 to 10 years warranty from the company that produced it. This is to give assurance to a client that intend buying and on the other side to show that solar energy it still the best source of getting electricity from rain, thunder, wind and sunlight.
5) I have talked about a long range of warranty above, but the only thing anybody that uses a solar panel need to have at the back of his or her mind is that, the panel needs maintenance occasionally once or twice yearly from the company that installed it. This is to make the panel to continue its work optimally.
6) This is what you should look out for when you want to use a solar panel; it must have what we call 'water tight facility'. This is crucial because of rain, snow and wide wind. Remember I said something about 'Photovoltaic', initially; when a water particle mistakenly goes into the cell area of the photovoltaic, and it seriously affects the panel from working well.
7) When going for a panel, go for one that has multiple ways of fittings, this will make it easy for anybody to attach it. Look out for panel with 'anodized aluminum'
There you have it '10 Sizzling SOLAR PANEL Tips That'll SAVE YOUR CASH' forever. With these tips, your best choice should be going for solar energy, which I also went for after spending huge amount on bills on electricity. Get more details tips here
Wednesday, August 12, 2009
Knowing More About Solar Energy
The current financial crisis and the unstable state of the international oil bank is not a reliable news for all. It is actually an eye opener for everybody, cause it makes people opt for alternative sources of getting power supply. This has become the solution to reducing the present-day and the impending energy consumption, particularly in terms of usage of gas to generate electricity. Using of earth natural energy like sunlight, wind and lighting has been discovered to be more cheaper for both individual and the macro economy. Producing a personal solar panel that make use of deep cell storage space batteries give the power supply which an individual needs and indirectly making the person to be self dependent on the solar panel to provide the electricity needed by the person. A lot of people will want to grab this unique opportunity of using solar energy to generate electricity needed. Because it is relatively cheaper to maintain and used. Then you will need to get the following tips on how really solar energy can help you
• IT WORKS! Solar energy has been put to the test by thousands of people worldwide. And has been very successful the most popular when it comes to alternative and cheap electricity generator.
• You can reduce your power bill. By making your own solar panels and wind turbines you can combine them and significantly reduce your power bill, you can even eliminate it completely!
• Save money by making your own solar panels rather than purchasing retail panels. This alone can save you thousands!
• Do your part for the environment! If you are looking for a way to go green then this is the perfect resource for you.
IF you simply sit back and do nothing you are surely going to pay more than you ought to for electricity. You can save thousands by making your own solar panels and save even more off your power bills. For more details on how you can get cheap and free tips just here
Subscribe to:
Posts (Atom)
